Container Blowing Machine 2 steps
Production Line Description for narrow and wide mouth glass containers
Our automatic blowing machine is conceived to produce glass containers or bottles with blow‑blow process, for alimentary industry or chemical products up to 5 liters.
Single Section IS MACHINE size 4 ‑ ¼“ e 5 ½“
The section mechanisms are assembled on a solid welded structure and is composed by the following mechanism included on board lubrication circuit, pneumatic circuit and electrical circuit.
The machine concept is to allow a flexible production by separating the process steps.
Teamwork
The hot glass can be feeding by Standard Feeder Mechanism, Slow Gob Feeder and Ball Gatherer Robot.
Safety first
Automatic transferring in 2 steps of the parison through the individual section standard version forming machines size 4 ‑ ¼“ e 5 ½“ and follows the safety norms and is CE Certificate.
The blowing process consists in two phases:
Glass gob Pre‑forming
Blowing of parison in the finishing mould
Article Data in Blow ‑ Blow & Press ‑ Blow forming process
Maximal inner Neck Ring Diameter (blow ‑ blow)
90mm
Maximal inner Neck Ring Diameter (press ‑ blow)
120mm
Maximal Body Diameter
180mm
Article maximum Height (blow ‑ blow)
350mm
Article maximum Height (press ‑ blow)
280mm
Maximal Gob weight
3Kg
Maximal capacity volume
5Lt
Production rate
2-6 Pcs./min
Gallery
Structure of the circuit
Pre‑shaping plunger
Vacuum/compressed air chamber for the rim forming and the glass article pre‑shaping
Pneumatic Funnel holding group with mechanical cam
NEW Servo Invert Neck Ring holding group
Pneumatic Buffel holding group with mechanical cam
Blank Mold Pneumatic opening/closing mechanism system for two parts
Pneumatic Buffel holding group with mechanical cam
NEW Servo Invert Neck Ring holding group
Blow Mold Pneumatic opening/closing mechanism system for two parts
Blowing head assembly operated by standard E‑Valve type 24 Vdc
Vacuum/compressed air chamber for the forming glass article final shaping
Pneumatic transfer pusher from cooling plate to conveyor
NEW Servo Take‑Out group for article transfer on the cooling plate
Pneumatic transfer pusher from cooling plate to conveyor
NEW Servo Take‑Out group for article transfer on the cooling plate
Container Blowing Machine 3 steps
The automatic blow molding machine is designed to produce glass containers or bottles with the blow/blow process, or press/blow process for the food industry or chemical industry up to 54 litres production.
The concept of the machine is to enable flexible production by separating the process steps.
Teamwork
The IS wide section blowing machine can be fed by the feeding mechanisms Gob Platinum Feeder Mechanism, Slow Gob Feeder, Gob Feeder e Ball Gatherer Robot.
High automation
The glass transfer occurs automatically in three steps, from preforming to final blowing, via two servo-motorized transfer Take Out.
The blowing process
The blowing process takes place in three phases, the first two take place using the enlarged single-section molding machine, while the third phase takes place using a rotary press with two moulds:
Glass drop into Preforming mold
Blowing the parison into the pre-finishing mould
Blowing the parison into the finishing mould
Article Data in Blow ‑ Blow & Press ‑ Blow forming process
Maximal inner Neck Ring Diameter
120mm
Maximal Body Diameter (blow ‑ blow and press ‑ blow)
420mm
Article maximum Height under finish(blow ‑ blow)
900mm
Article maximum Height under finish(press ‑ blow)
600mm
Maximal Gob weight
12Kg
Maximal capacity volume
60Lt
Typical daily pull
20TPD
Production rate